23 mils 15 mils 15 mils 23 mils 189 cd4099 thru cd4135 backside is cathode figure 1 design data metallization: top: (anode)........................al back:(cathode)...................au al thickness ............25,000 ? min gold thickness ... .....4,000 ? min chip thickness ............ ......10 mils circuit layout data: for zener operation, cathode must be operated positive with respect to anode. tolerances: all dimensions + 2 mils ? 1n4099 thru 1n4135 available in janhc and jankc per mil-prf-19500/435 ? zener diode chips ? all junctions completely protected with silicon dioxide ? 0.5 watt capability with proper heat sinking ? electrically equivalent to 1n4099 thru 1n4135 ? compatible with all wire bonding and die attach techniques, with the exception of solder reflow maximum ratings operating temperatures: -65c to +175c storage temperatures: -65c to +175c forward voltage @ 200 ma: 1.5 volts maximum electrical characteristics @ 25c, unless otherwise speci?ed. cdi nominal zener maximum maximum reverse type zener test zener leakage current number voltage current impedance v z @ i zt i zt z zt i r @ v r (note 1) (note 2) volts a ohms a volts cd4099 6.8 250 200 10.0 5.17 cd4100 7.5 250 200 10.0 5.70 cd4101 8.2 250 200 1.0 6.24 cd4102 8.7 250 200 1.0 6.61 CD4103 9.1 250 200 1.0 6.92 cd4104 10 250 200 1.0 7.60 cd4105 11 250 200 .05 8.44 cd4106 12 250 200 .05 9.12 cd4107 13 250 200 .05 9.87 cd4108 14 250 200 .05 10.65 cd4109 15 250 100 .05 11.40 cd4110 16 250 100 .05 12.15 cd4111 17 250 100 .05 12.92 cd4112 18 250 100 .05 13.67 cd4113 19 250 150 .05 14.44 cd4114 20 250 150 .01 15.20 cd4115 22 250 150 .01 16.72 cd4116 24 250 150 .01 18.25 cd4117 25 250 150 .01 19.00 cd4118 27 250 150 .01 20.46 cd4119 28 250 200 .01 21.28 cd4120 30 250 200 .01 22.80 cd4121 33 250 200 .01 25.08 cd4122 36 250 200 .01 27.38 cd4123 39 250 200 .01 29.65 cd4124 43 250 250 .01 32.56 cd4125 47 250 250 .01 35.75 cd4126 51 250 300 .01 38.76 cd4127 56 250 300 .01 42.60 cd4128 60 250 400 .01 45.60 cd4129 62 250 500 .01 47.10 cd4130 68 250 700 .01 51.68 cd4131 75 250 700 .01 57.00 cd4132 82 250 800 .01 62.32 cd4133 87 250 1000 .01 66.12 cd4134 91 250 1200 .01 69.16 cd4135 100 250 1500 .01 76.00 note 1 zener voltage range equals nominal zener voltage + 5% for no suffix types. zener voltage is read using a pulse measurement, 10 milliseconds maximum. "c" suffix = + 2% and "d" suffix = + 1%. note 2 zener impedance is derived by superimposing on l zt a 60hz rms a.c. current equal to 10% of l zt . 6 lake street, lawrence, massachusetts 01841 phone (978) 620-2600 fax (978) 689-0803 website: http://www.microsemi.com
190 cd4099 thru cd4135 .1 .2 .3 .4 .5 1 2 5 10 20 30 40 50 100 operating current l zt (ma) figure 3 zener impedance vs. operating current 1000 500 400 300 200 100 50 40 30 20 10 5 4 3 2 1 zener impedance z zt (ohms) 3.3 volt 5.1 volt 27 volt 11 volt 6.2 volt
|
